All-in-one Mounting Bracket for Dragino DLOS8 onto Winegard Swedged Poles

Description

3D printed bracket for the Dragino DLOS8 LoraWan Gateway.

I have found that the included hardware was never quite right for most mounting situations. I like using the Winegard 5ft Swedge poles because you can go up to, say 15ft, by using 1, 2, or 3 of those 5 foot poles.

To use this, mount the antenna mounting place onto the antenna. I use this because it make a really secure slide-in method for the antenna-to-bracket mount.

Next, take off the pivot bolt on the gateway mounting bracket and mount the pivot ONLY to the gateway.

Now, insert the include bolt and washers through the hole and tighten snugly, but hand firmness only. The 3D printed bracket is strong, but you can break things easily if you use wrenches. If you are worried about the nut coming off, just put some construction glue on it.

Now just slide the bracket onto the swedged pole. It is just that simple.