Description
{ "@context": "https://schema.org", "@type": "Product", "name": "Key Holder for Wall – Mounts Under a Light Switch Cover Plate", "brand": { "@type": "Brand", "name": "BearMar" }, "sku": "[[SKU]]", "mpn": "[[MPN]]", "description": "A key holder that mounts behind your existing light switch cover plate. No drilling, no adhesive. Fits standard, mid-size and jumbo 1–4 gang plates. Rated 2 lb.", "material": "[[material]]", "image": [ "https://bearmar.com/wp-content/uploads/key-holder-under-light-switch-plate-1.jpg"], "offers": { "@type": "AggregateOffer", "priceCurrency": "USD", "lowPrice": "11.99", "highPrice": "13.99", "offerCount": "8", "availability": "https://schema.org/InStock", "itemCondition": "https://schema.org/NewCondition", "url": "https://bearmar.com/shop/key-holder-for-wall-hook-rack-that-slips-under-a-light-switch-cover-plate/" } }This tough key holder for wall mount puts the key chain hooks exactly where you need them – right by the door! No more looking for the leash, keys, phone, or charger in the messy organizer basket before you leave your house.
Keys by the door, using a plate that’s already there
Every entry door has a light switch next to it. That cover plate is screwed to a box that’s anchored in the wall — so the plate is already the strongest thing on that wall, and it’s already exactly where you drop your keys.
This key holder slips behind that plate and turns the dead space under it into hooks. You don’t replace your cover, you don’t drill, and you don’t stick anything to the paint. When you move out, you take it off and the wall looks untouched.
It’s one printed part, made here in the shop. I designed it because I was tired of hunting for keys in a basket by the door.
Will it fit your switch plate?
It fits behind standard wall plates for 1, 2, 3, and 4-gang boxes, in toggle and Decora/rocker styles.
| Plate | Typical size | Fits |
|---|---|---|
| Standard 1-gang | 2.75 × 4.5 in | Yes |
| Mid-size | 3.13 × 4.88 in | Yes |
| Jumbo | 3.5 × 5.25 in | Yes |
| Multi-gang (2, 3, 4) | Standard spacing | Yes, pick your gang count |
| Decora / rocker | Any of the above | Yes |
| Surface conduit or extension box | — | No |
| Switch not flush with the wall | — | No |
The plate sits about 2 mm further off the wall than before. On a white plate against a white wall, you won’t notice.
Specifications
| Material | Normally PLA, but PCTG possible, materials source in USA, designed in USA, and printed in the USA |
| Plate color | White (special order possible) |
| Hook color | Black (special order possible) |
| Hook count | Number of Gangs + 1 (2 gang has 3 hooks as an example) |
| Hook opening | fits split rings and carabiners |
| Projection from wall | 3 inches |
| Added plate standoff | About 2 mm |
| Load rating | 2 lb total, across all hooks |
| Unit weight | 4 ounces, but depends on how many gangs |
| Tools needed | Small flat head screwdriver |
| Install time | About 2 minutes |
| SKU | Select a product variation to see |
This Key Holder Hook Rack utilizes the normally wasted space of the Light Switch Cover
As a result, I invented this great light switch cover idea that integrates in a keychain hook rack that doesn’t even have to replace your light switch cover wall plate. Instead it works WITH your light switch cover.
Working WITH your light switch cover is what this amazing wall hanging key holder hook rack does. It mounts underneath the light switch cover easily. The hanger hooks optimizes part of the kitchen counter storage by using un-utilized space. it holds big keychains – not a teeny tiny hook like most keychain hooks.
Installation instructions for the Keychain Hook Rack:
- Remove Power at the light switch by switching off the correct breaker.
- Remove the light switch cover wall plate.
- Next, place the wall mount bracket over the light switches.
- Replace the light switch cover wall plate carefully watching for alignment.
- CAUTION note, don’t tighten the light switch cover screws too tight. Tighten just enough so that the light switch cover plate doesn’t wiggle.
- Switch on the breaker to put power back onto the switch.
If the screws won’t catch: the bracket is probably sitting slightly high or low. Loosen both screws, let the bracket settle, and start the top screw first.
If the plate won’t sit flat: your switch or box isn’t flush with the drywall. This mount needs a flush wall — that’s the one install it can’t fix. You will need to work with a carpenter to repair your light switch so it is a flush mount light switch.
How this light switch keyhook compares to other key hook concepts
| This mount | Adhesive hook | Screw-in rack | Over-the-door | |
|---|---|---|---|---|
| New holes in the wall | No | No | Yes | No |
| Works on textured or fresh paint | Yes | Poorly | Yes | Yes |
| Survives heat and humidity | Yes | Often fails | Yes | Yes |
| Needs a door | No | No | No | Yes |
| Renter friendly | Yes | Mostly | No | Yes |
| Holds 2 lb reliably | Yes | Rarely | Yes | Yes |
| Consumes New Wall Space | No | Yes | Yes | Yes |
Features of the Keychain Rack for UNDER Light Switch Cover Installations:
- This “key holder hook rack for wall mounting underneath light switch cover plate” design universally fits most wall plates. The different size of wall plates: regular, medium, jumbo. no need to worry about measuring!
- The hooks are very strong – these keychain hooks can easily hold 2-3 pounds
- Your light switch cover cannot hold too much weight.
- As a result, I recommend 2 pounds as a maximum across all of the hooks.
- Above all I offer a “make it fit” guarantee. if you have the number of switches correct, but for some reason it won’t fit, i’ll help you fix it.
- I can’t fix a problem where the switch is mounted incorrectly. properly mounted switches are flush to the wall.
What people hang on the light switch cover Key Holder Hook Rack:
- wall key holder bracket / keychains
- leash holder / leash hook for wall mount
- flashlight holster style mount or flashlight holder for wall
- universally useful unique key holder hook rack
- cord wrapper, or cord winder or cord organizer for wall
Questions people ask before buying (or FAQ)
No. You remove the cover plate, put the bracket behind it, and screw the same plate back on.
2 lb total across all the hooks. That is MORE than enough for keys!!!!. The plastic will take more, but the cover screws and the electrical box are the real limit, so I rate it at what the screws will hold safely.
Yes. It fits behind the plate, so the switch style doesn’t matter as long as the plate is a standard, mid-size, or jumbo wall plate.
Then it won’t sit right, and I’d rather tell you now. The bracket needs the plate to pull flat against the drywall. A switch that’s recessed or proud of the wall is the one case I can’t fix. The good thing is that 95% of all switches are flush mounted.
Yes. Nothing goes into the wall, and it comes off in two minutes when you move out.
It sits about 2 mm off the wall instead of flush. Most people never notice, and the plate still covers the box opening.
Indoors is what it’s made for. Those items listed in the question are just find though as they are inside applications.
Tell me your gang count and plate size and I’ll make it right. That’s the make-it-fit guarantee. I can’t fix a switch that isn’t mounted flush, but I can fix a fit problem.
I design and print these myself, one at a time, and ship them from here. If something doesn’t fit, you’re emailing the person who made it, not a support queue. Custom colors and custom plate layouts are possible — ask. I source all my materials from US manufacturers such as Atomic Filament or 3DFuel. This adds to your price slightly, but I’ve no plans to put fellow citizens out of work to save a few pennies.























Reviews
There are no reviews yet.