Description
This tough leash holder for wall mount puts the dog leash on a BIG STRONG hook exactly where you need the leash – right by the door under the light switch cover plate! No more looking for the leash before you leave your house.
The leash lives where the door is
The light switch by your entry door is screwed into a box that’s anchored in the wall — already the strongest thing on that wall, already exactly where you grab the leash. This holder slips behind that cover plate and puts one big hook in the dead space underneath it.
No new holes. No adhesive on the paint. When you move out, the wall is untouched.
Will it fit your plate?
| Plate | Fits |
|---|---|
| Standard, mid-size, jumbo | Yes |
| 1, 2, 3, 4-gang | Yes — pick your gang count |
| Toggle or Decora/rocker | Yes |
| Surface conduit or extension box | No |
| Switch not flush with the wall | No |
The plate ends up about 2 mm further off the wall. You won’t notice it.
Specs / Specifications
| Spec Item | Spec Description |
|---|---|
| Material | PLA (PETG, PCTG as well), designed, sourced, and printed in the USA |
| Plate color | White |
| Hook color | Black |
| Paw print option | Yes, but go to contact page for a customized design if you want |
| Hook count | 1 |
| Hook opening | about 1 inch — takes a leash clip, not just a key ring |
| Added plate standoff | About 2 mm |
| Load rating | 2 lb total |
| Tools needed | straight head screwdriver |
| Install time | About 2 minutes |
| SKU | bdlh_2u |
The hook itself will take 3–4 lb. I rate the product at 2 lb because the cover plate screws are the real limit, and I’d rather you stay under it.
Installation
- Turn the power at the breaker off to the swtich
- Turn the switch off. You’re only removing the cover, but it’s the right habit.
- Back out the two plate screws and lift the cover off. Keep them — 6-32, reused.
- Set the bracket over the switch opening, holes lined up with the box.
- Replace the cover and start both screws by hand. Snug until the plate stops wiggling, then stop.
- Turn the power at the breaker back on to the switch.
If the screws won’t catch: you’re slightly high or low. Loosen both, let the bracket settle, start the top screw first.
If the plate won’t sit flat: the switch or box isn’t flush. That’s the one install this can’t fix.
Why not an adhesive hook or a screw-in rack?
Adhesive hooks let go in heat, humidity, or on dusty paint — and a leash pulls sideways every time the dog bolts for the door. Screw-in racks leave four holes you’ll patch. This borrows the anchor already in your wall and adds nothing permanent.
Custom work
I do small custom runs: hook color, plate color, both, a name or simple graphic above the switch plate in up to four colors, a custom outlet layout, or a plain leash hook with no plate at all. Ask first and I’ll tell you if it’s worth doing.
Questions or Frequently Asked Questions
Yes — 2 lb total is plenty for a leather leash, a heavy clip, and a set of keys. The limit is the plate screws, not the hook.
The hook opening is 1 inch square, sized for a standard leash clip and carabiner rather than just a key ring. You’ll easily be able to get a leash to hang on this hook.
No. Cover plate off, bracket in, same plate back on.
Yes. Nothing enters the wall and it comes off in two minutes.
It won’t sit right, and I’ll say so up front. The bracket needs the plate to pull flat against drywall. Usually a little carpentry work can fix a wonky light switch.
Yes — mudroom, garage entry, kennel wall, anywhere there’s a switch. It is designed for indoor use. However, you could probably adapt it for outdoor use by using caulk.
Better yet, if you could wall mount the dog leash hook underneath the light switch plate cover, you save space and don’t have to drill any new holes or hurt your walls. Even better, this is a great light switch cover plate idea that doesn’t even have to replace your current wall plate.
That is what this leash holder wall mount with a big hook does. It mounts underneath the outlet cover guard easily and optimizes part of the house by using un-utilized space. it holds big leashes – not a teeny tiny hook like most leash hooks.
Features of the Leash Holder for Wall Hanging:
- This “leash holder for wall mounting underneath light switch cover plate” design universally fits the different size of wall plates: regular, medium, jumbo. no need to worry about measuring!
- The big wall mount leash hook is very strong – easily holding 3-4 pounds – however, your light switch cannot
- so i recommend only about 1 pounds, maybe 2 as a maximum.
- Attractive paw print design option plus a black leash hook gives the leash hanger a great look.
- I offer a “make it fit” guarantee. if you have the number of switches correct, but for some reason it won’t fit, i’ll help you fix it. note – i can’t fix a problem where the switch is mounted incorrectly. properly mounted switches are flush to the wall.





















Reviews
There are no reviews yet.