Screwless Enclosure Case for the Raspberry Pi 5 Development Board

Description

Now you can have a Screwless Enclosure Case for the Raspberry Pi 5 Development Board Enclosure and protect your development board from inadvertent short circuits or other mishaps. You can also mount this Screwless Enclosure Case for the Raspberry Pi 5 Development Board Enclosure using the mounting screws. Email to discuss modifications.

This Screwless Enclosure Case for the Raspberry Pi 5 Development Board Case comes in two pieces. A top piece with cutouts for access to the Screwless Enclosure Case for the Raspberry Pi 5 Development Board development board. Without OPENING the case, you can:

1. press reset buttons,
2. see the LED lights,
3. Access the expansion ports,
4. access the USB ports,
5. access the Ethernet port and
6. Adjust the jumpers.

This Screwless Enclosure Case for the Raspberry Pi 5 Development Board Enclosure is assembled with the following steps:

1. Snap in the Screwless Enclosure Case for the Raspberry Pi 5 Development Board.
2. Slide in the slide until the keeper snaps. This does not use a compliant mechanism, but the case will flex slightly until the keeper finds the keeper tab slot.

There are mounting holes in the slide mechanism on the Raspberry Pi 5 Enclosure. You can mount the slide FIRST on a wall, board, cabinet, perhaps even a 1U enclosure as the spacing is the 1U enclosure spacing. There are multiple mounting options enabled by the unique slide on design.

Current Features, attributes, and instructions:

• Gray PLA
• Screwless design – Snap together
• Pushbutton access without opening the design
• LED viewing holes so board can be monitored without opening
• Add on board connectors accessible
• Special orientation to protect against layer lines
• Volume quoting possible
• Mounting plate is also the bottom cover of the case making a very strong mounting arrangement

Happy to customize. Customization options:

• Material : Currently PLA – (others: ABS, ASA, PETG, potentially carbon fiber)
• Colors: PLA – Puke Green, Blue, Red, White, many others. For other materials, ask…
• Embossed Logo and PN
• I can make a Pie Rack (funny, right) where I can mount as many as you need all on a single rack.
• Color Logo
• Mounting options: The design is modular and the mounting slide can be modified in many way. If desired, a multi-board mount could be created so you rack mount a bunch of boards.
• Case Cover: We could add less board access, light pipes, hide the connectors, embed in a bigger design, etc.
• Design Files: Happy to make these available for sale. I had to make a simple 3D model of the board. Not fancy. But very useful.