WIRELESS 4-20ma current loop cable replacement

Description

Eliminate EXPENSIVE SCADA radios or EXPENSIVE cable trenching between 4-20ma current loop sensors and programmable logic controllers.

Using the BATTLE HARDENED, TRIED AND TESTED, LORA (LOng RAnge) wireless protocol, now you can eliminate cable runs of up to 8 miles (or 15km). Of course the LORA loves line of site, but this is also a low frequency spread spectrum technology that can penetrate walls easily. Of course any obstacle reduces the range. This isn’t silly “toy band” radio, this is a spread spectrum frequency hopping radio system that can handle demanding environments.

Each WIRELESS 4-20mA cable replacement consists of a PAIR of endpoints, one end a 4-20ma transmitter and the other end a 4-20ma receiver. They are interconnected by the LORA wireless technology.

• 4-20mA Wireless Transmitter Unit
  • 5-24V DC inputs
  • Power: 140mA per transmission / 4mA in idle
  • Paired with a Receiver Unit – This allows for MANY WIRES in an installation
  • This is the end that connects to a standard 4-20mA sensor
  • On a period basis that is adjustable (standard is 10 min) the transmitter checks the sensor and then transmits the 4-20mA current level
  • Many of these remote transmitters are powered by small solar installations (you can find easily on Amazon, etc.)
• 4-20mA Wireless Receiver Unit
  • 5-24V DC inputs
  • Power: 4mA in idle / A 140mA ack/nack transmission will be sent back to the Transmitter
  • Paired with a Transmitter Unit – This allows for MANY WIRES in an installation because these “virtual wires” won’t interfere with one another due to LoRA radio magic.
  • This is the end that connects to a standard 4-20mA receiver such as a 4-20ma to RS485 converter or a PLC
  • On a period basis determined by the Transmitter Unit, this receiver receives the 4-20mA current level digitally and then provides a 4-20ma signal that is an exact mirror of what the Transmitter Unit detected. Very cool
  • Generally, the wireless 4-20mA cable receiver will have power on its end as it is close to many devices which utilize the 4-20mA inputs for a control system.
• Both Units
  • ISM Frequency Bands 915MHz (USA)
  • FCC Certified (USA) & IC (Canada) requirements
  • CE marked
  • RoHS compliant
  • DIN Rail Mounts
  • Professionally Molded Case with custom fit electronics
  • This product is built for scale production
• LORA Wireless Key Bullets
  • AES 120 bit encryption
  • Absolutely NO SIM CARDS required.
  • Security uses several magic numbers
  • Uses ISM bands and requires no special licenses
  • Transmission power are carefully maintained within FCC power envelope
  • As of June 2024, over 350 million LoRa Radiod integrated circuits have been deployed worldwide

LEAD TIME: Approximately 4 Weeks